background image

11

CLEANING (CONTINUED)

SECTION IV - CARE & MAINTENANCE

2.  To remove stubborn stains:

 

Apply a mild abrasive such as toothpaste or liquid tooth polish using a soft, white cloth.

 

Using a chamois or moist sponge, remove all traces of the mild abrasive.

 

Dry the area thoroughly to prevent marking.

Formula 409 is a registered trademark of the Clorox Company. Fantastik Spray Cleaner is a registered trademark of the Texize 

Division of Dow Products, Inc.

METAL SURFACES AND CHROME PARTS

For ordinary dirt, fingerprints, etc., use a non-abrasive, all-purpose cleaner.

The stool's upholstery is comprised of material from the following manufacturers:

Naugahyde

®

 Beauty Gard

®

 from Uniroyal

Naugahyde brand fabrics, Spirit II and Neochrome II with Advanced Beauty Gard contains an agent to protect 
it against bacterial and fungal microorganisms. This product has been formulated to achieve a superior level of 
disinfectability with disinfectant products containing sodium hypochlorite (common household bleach) diluted 1:10.

Ultraleather

®

 from Ultrafabrics

®

 

Disinfect with a 5:1 non-chlorinated bleach solution.

 

Potentially toxic aftercare not required.

Naugahyde and Beauty Gard are a registered trademarks of Uniroyal Engineered Products, Inc. 

ALL OTHER STOOL SURFACES

CaviCide

TM

 from Metrex

TM

 Research

CaviCide is recommended for disinfecting all other surfaces of the stool. The use of any disinfectant other than 
CaviCide may cause premature staining, discoloration or damage to the stool’s materials.

CaviCide is a trademark of Metrex Research, LLC.

 

UPHOLSTERY

DISINFECTING

Summary of Contents for Heritage Generation Stool




















Reviews: