6
GENERATION
TM
STOOLS
866-DTE-INFO
dentalez.com
PN: 2717-221D
FIGURE 5. PLACE OPEN HOLE IN CONTROL PLATE
OVER TOP END OF CYLINDER
CONTROL PLATE
CYLINDER
SEAT
OPERATOR STOOL
ASSISTANT STOOL
SEAT
CONTROL PLATE
CYLINDER
ASSEMBLY INSTRUCTIONS
SECTION III - INSTALLATION
INSTALL SEAT
1.
If a footring is included, slide the bottom of the
cylinder through the footring
(FIGURE 3)
.
2. Place the large end of the cylinder (with footring
attached) into the center hole of the base.
3. If a body support is included, place the gooseneck
over the top end of the cylinder until it comes in
contact with the collar
(FIGURE 4)
.
FIGURE 3. SLIDE BOTTOM OF CYLINDER THROUGH
FOOTRING, AND PLACE LARGE END OF CYLINDER
INTO CENTER HOLE OF BASE
FOOTRING
CYLINDER
BOTTOM
CYLINDER
BASE
4. Place the open hole in the control plate (seat
support) over the top end of the cylinder
(FIGURE 5)
.
5. Apply pressure to the top of the seat to lock the
base, cylinder and seat together.
GOOSENECK
COLLAR
CYLINDER
TOP
FIGURE 4. PLACE GOOSENECK OVER TOP OF
CYLINDER