NOTICE
3
Setup
3-1 Connecting the stand
Insert the AC adapter plug into the connector on
the back of the stand until it stops (Fig. 1).
When disconnecting the AC adapter plug, hold
the stand firmly and pull out straight.
3-2 Connecting the disposable handpiece (disposable prophy angle)
• Only use a disposable prophy angle.
• Any commercially available disposable prophy angle compatible to ANSI/ADA N. 85-
1:2004 can be used with the iStar.
• Always wear safety glasses and dust mask during use.
(1) Connecting
1) Turn off the handpiece motor.
2) Cover the handpiece with the
supplied single-use handpiece
sleeve (Fig. 2).
3) Connect the disposable prophy
angle firmly to the handpiece.
Check that the connection is
secure by running the handpiece
outside of the patient's mouth.
(Fig. 3, 4).
(2) When operation is complete, turn off device and disconnect the disposable prophy angle.
1) Turn off the handpiece motor by depressing the Power button until the speed lights turn off.
2) Pull straight on the disposable handpiece (disposable prophy angle) to remove.
7
Fig. 1
iStar
Fig. 2
Fig. 4
Fig. 3
