3 Product description
3.2 Controls and functional elements of the DAC UNIVERSAL
Dentsply Sirona
Operating Instructions DAC Universal
26
6681006 D3708
D3708.201.01.01.02 04.2019
3.2.8
NitramOil #2 lubrication concentrate
The NitramOil #2 lubrication concentrate is used to lubricate the drive
channels and the rotor of the turbines, straight and contra-angle
handpieces, and is not screwed into the device upon delivery.
The bottle must be screwed in before the first use of the DAC Universal.
NitramOil #2 is approved by leading international instrument
manufacturers.
One bottle of NitramOil #2 is enough for lubricating approx. 200 cycles
(corresponding to approx. 1200 straight, contra-angle, or highspeed
handpieces).
The lubrication concentrate comes in a no-pressure bottle.
(Safety) information for the lubrication concentrate
NOTE
Too much oil, e.g. from manually adding lubrication, may result in
overlubrication of the instrument.
NOTE
Please lubricate the collet system of your turbines, straight and
contra-angle handpieces regularly as per the lubrication and
operating instructions from the respective instrument manufacturer.
NOTE
Use only NitramOil #2 for the DAC Universal.
IMPORTANT
In case of fire: There is maximum 200 ml / 0.043 imperial gallons of
oil in the DAC Universal. There is no danger that dangerous or
harmful gases can develop in case of fire.
NOTE
The oil must be stored and handled at temperatures below 50 °C (122
°F). Follow all warnings on the handling, use, and disposal of the oil.
This information is in the safety data sheet. The safety data sheet for
NitramOil #2 is available at www.dentsplysirona.com.
IMPORTANT
No toxic, harmful, or dangerous gases arise during the handling, use,
or removal of NitramOil #2. The oil is pumped directly from the bottle
into the DAC Universal.
