Step by Step Instructions
18
5 .3 .3 .2 Programming the Flow Handpiece
Step
Action
A
Press the segment of the touch-screen directly below the flow handpiece to
activate the settings for the flow handpiece.
The GP level indicator uses the position of the GP push-rod to estimate the GP
level remaining in the cartridge.
For instructional purposes, the flow handpiece is assumed to be on the left
side of the base station in the following illustration of the touch-screen.
Flow Handpiece
S
ettings and Indicators
Press here to adjust the GP flow
temperature
(130°–160°C)
using the
buttons that appear. Press here again to
exit the adjustment screen.
Press here to adjust the GP flow rate
(20%–100%)
using the
buttons
that appear. Press here again to exit the
adjustment screen.
Handpiece Battery
Level
Gutta-Percha
Level
If a HTR is installed and
working properly, this icon
appears:
If no HTR is installed or the
HTR is not working properly,
this icon appears:
Summary of Contents for Gutta-Smart
Page 1: ...Gutta Smart Directions for Use EN...
Page 39: ...39...
