background image

 Introduction

4

FOR DENTAL USE ONLY

 Introduction

Congratulations on your purchase of the 

Gutta‑Smart™

 cordless obturation 

system.

These Directions for Use are always kept up to date by Dentsply Sirona to bring 
them in line with the latest developments. You will find the current version on the 
website shown on the back cover page of this manual.

In countries where the legal situation enables us to do so, we have decided not to 
produce a printed version of the Directions for Use, for environmental reasons.

If no printed version is enclosed in your national language and you wish to have 
a printed one, we will be happy to send you a copy (free of charge within seven 
calendar days to any address in North America). To order, simply send your request 
to the contact shown on the back cover page of this manual.

The Directions for Use are available in other languages on request. These Direc-
tions for Use have been compiled with the utmost care; nevertheless, it is not 
always possible to completely rule out the risk of error, despite all efforts to do so. 
We would appreciate your feedback in this area. If any errors are noted, please con-
tact Dentsply Sirona at the address shown on the back cover page of this manual.

Dentsply Sirona reserves the right to change the information and data contained 
in the Directions for Use without prior notice.

Indications for use

The 

Gutta‑Smart™

 is a cordless obturation system designed for warm vertical 

obturation. The system contains handpieces that are used for down pack (Pack) 
and backfill (Flow) techniques to obturate the root canal system. 

The Pack handpiece is intended to heat electric heat pluggers for warming and 
softening gutta-percha master cones and searing off gutta-percha cones. This 
handpiece is also intended to heat a thermal response tip that subjects a tooth to 
heat in order to determine pulp vitality.

The Flow handpiece is intended for heating and extruding gutta-percha into the 
root canal system. The single-use gutta-percha cartridges are designed to place 
heated gutta-percha into a cleaned and shaped canal. 

The 

Gutta‑Smart™

 device can only be used with Dentsply Sirona gutta-percha 

cartridges, flow heaters, electric heat pluggers and thermal response tips.

—  Indications for use

Summary of Contents for Gutta-Smart









































Reviews: