61 30 608 D3497
36
D3497
.
076.01.09
.
02 10.2018
9 Replacing parts
Dentsply Sirona
9.8 Replacing the sintering chamber
Service Manual inFire HTC speed
10. Loosen the two screws (A) on the left and right that are used to attach
the front cover panel (B) to the device.
11. Remove the front cover panel (B) by lifting it slightly to unhook it.
12. Loosen the fours screws (C) that are used to secure the sintering
chamber in place from below.
13. Loosen the two screws (D) that are used to attach the sintering
chamber to the back panel of the device.
14. Remove the sintering chamber (E) from the device.
15. Insert the new sintering chamber and assemble it in reverse order.
A
B
NOTICE
Once the screws are loosened, the sintering chamber is no longer
attached to the device and can fall forward. The chamber must be
secured while loosening the screws. Ask a second person for
assistance during this step.
