63 69 149 D3561
D3561
.
076.01.07
.
02 02.2017
148
Dentsply Sirona
8 Service area
Service Manual Sinius / Sinius CS / Sinius TS
8.6 PC connection, networking
båÖäáëÜ
8.6
PC connection, networking
8.6.1
Control via SIUCOM plus / SIVISION connect
Control of PC programs via the treatment center
SIUCOM plus enables you to control PC applications through the Sinius
/ Sinius CS / TS Sinius Sirona treatment center. The PC functions can be
operated via the user interface of the treatment center (touch screen) or
the system foot control.
Ethernet connection is required
This is achieved through communication of the treatment center with the
PC via the Ethernet interface and the practice network. The function
codes generated by specific operations in the treatment center are
assigned to the desired PC functions in the SIUCOM program. Under
certain circumstances it is therefore possible to start, terminate and
control PC applications.
Third-party programs can also be controlled in this manner
The SIUCOM plus PC program provides the Sirona SIUCOM plus
interface for operating functions inside PC programs of other
manufacturers.
The operating functions provided by the manufacturer of the SIUCOM
plus-capable PC application can thus be triggered from the treatment
center.
For further information, please see "Installation and Configuration -
SIUCOM plus/SIVISION connect": REF
"6194323"
