Additional Directions For Use
26/48
B EN XS00 DFU WEB / Rev.08 / 01-2018 (Old ZF 190270.EN)
7
ADDITIONAL DIRECTIONS FOR USE
7.1
Program
This product is programmed in advance with 1 to 9 programs according
to various files to be used. You can change any preset values and have
them saved to your desired settings (rotation speed, torque limit value,
gear ratio and auto reverse mode).
(1)
Press the PROGRAM key until it turns to the program number which
you want to memorize.
(2)
Adjust the rotation speed, torque limit value, gear ratio and auto
reverse mode by each key according to your needs.
(3)
Hold down the MEMORIZE key for more than one second. When the
alarm sounds, memorization is completed.
NOTICE
• The program cannot be memorized while the motor handpiece is
in motion.
• The rotational direction is not memorized in the program. The
program cannot be memorized if the rotational direction is set to
the reverse rotation (R).
• If the PROGRAM key is held down, it is fast-forwarded.
• The program is not memorized unless the MEMORIZE key is held
down for more than one second. If the program number is
changed by the PROGRAM key without pressing the MEMORIZE
key, the initially memorized preset values remain (cancel
function).
