background image

You should never ride sideways or turn on a slope. It will lead to a fall and injury.

2.5.

Always react on alarms

Scooter will not operate in the following situations:

During operation, if the system runs an error, the scooter will prompt operators in different ways such as
prohibit riding, alarm indicator lights, buzzer alarm beeps intermittently the system cannot enter self-
balancing mode.

When stepping on the scooter the platform moves forwards or backwards more than 10 degrees, the
unit will not operate.

The voltage of the battery is too low.

During charging.

During operation, the platform turns upside down will prohibit operation.

Over speeding.

The battery is not charged enough.

Tire stall, two seconds later the scooter enters power off mode.

The battery voltage is lower than the protection value, 15 seconds later the electric scooter enters into
power off mode.

Continuing large current discharge (such as a long-time climbing a very steep slope)

When the scooter enters into the shutdown state, the system will lock down the machine
automatically. It can be unlocked when you press the power button. When the battery has been
depleted or the system gives out information with safety shutdown, please do not continue to drive
the scooter, otherwise, the scooter cannot balance for the lack of battery. In this condition, the driver
is likely to be harmed. If the battery reaches the minimum, the continued driving of the scooter will
negatively affect the battery’s life.

The product should only be used in temperatures between -10°C - +45°C.

2.6.

Riding practice

Before you drive the scooter, please make sure you are familiar with the skills of driving it. Always practice
with someone ready to hold/catch you.

Use casual (but not loose) clothes and flat shoes in order to retain your body’s flexibility.

Please go to open spaces to practice driving the scooter until you can easily get on and get off.

Make sure that the surface is level.

When you are driving on different terrain, you must slow down.

Balance scooter is a driving tool designed for a smooth road. Reduce speed if you drive the scooter on
a rough surface.

Before driving: Read Chapter 4 on maximum speed and Chapter 5 on safe driving thoroughly

Chapter 3 Pedal Sensor and Indicator operation

3.1.

Pedal sensor

Balance scooter has 4 sensors below the pedal, when the operator steps on the pedal, the scooter will adjust
itself to a balancing pattern automatically. When riding it, you have to make sure that the pedal is being fully
stepped on, please do not step on the parts outside the pedal. Do not put things on the pedals to make the
scooter operate by itself and increase the possibility of crashing and even cause personal injury and damage
to the scooter itself.

3.2.

Battery & Operation Indicators

The indicator is located in the middle of the scooter. It is used for operation information.

Operation indicator: When the pedal is triggered, the operation indicator will light then the system comes
into operating condition; when the system runs an error, the indicator will turn red.

WARNING!

Battery indicator on the balance scooter will show green color as long as there is sufficient power on the 

        battery to drive.

Battery indicator on the balance scooter will show red color when battery power is down(15-20% left) and 

        you will  you need to stop driving and start to recharge the balance scooter. 

Battery indicator on the balance scooter will show RED and have WARNING ALARM SOUND when battery 

        power has run out and you must stop driving immediately. The balance scooter will now shut down without 
        further notice and the balance scooter will then loose balance. You may have risk to get injured if still try to 
        keep driving.

Summary of Contents for DBO-6501













Reviews:

Related manuals for DBO-6501