background image

Using another charger may damage the product or create other potential 

risks.

Plug   the   power   adapter   into   the   DC   power   port   on   the   back   of   the 

hoverboard and a standard power outlet. 

Make sure the green indicator on the adaptor lights up.

When the red indicator lights on the charger indicate charging properly, 

otherwise check if the line is connected properly.

When the indicator light on the charger changes from red to green, this 

indicates that the battery is fully charged.

In this case, please stop charging. Over charging will affect the battery life.

Charging may take up to 5 hours. Do not charge the battery for more than 5 

hours. Disconnect the charger from the hoverboard and the power supply after 5 
hours. Overcharging will reduce the lifetime of the battery.

The product should not be charged over longer periods than 5 hours.

Never charge the product without supervision.

The product should only be charged in temperatures between 0°C - +45°C.

If   charging   at   lower   or   higher   temperatures,   there   is   a   risk   that   the 

performance of the battery will be reduced and a potential risk of damage to the 
product and personal injury.

Charge   and   store   the   product   in   an   open,   dry   area   and   away   from 

flammable materials (i.e. materials that may burst into flames).

Do not charge in sunlight or near open fire.

Do not charge the product immediately after use. Let the product cool 

down for one hour before charging.

If   the  product   is   left  with   other   persons  for   example   during  a  holiday 

period, it should be partially charged (20-50% charged). Not fully charged.

ENG 

12

Summary of Contents for DBO-6531



















Reviews: