ENG 4
1.
Insert the DC plug (at the end of the AC adaptor cord) into
the DC input jack (2)
2.
Plug the AC adaptor into a 220/230V~ 50Hz AC power
socket.
3.
The unit will automatically disconnect from using battery
power and operate using the AC adaptor.
4.
Press the POWER ON/OFF button (1)
IMPORTANT!
Only use an adaptor with an output voltage rated as DC
4.5V 800mA, with a centre negative plug.
IMPORTANT!
If there is noCDinside the unit, NoCd will appear on the
LCD display (15).
Playing a CD or MP3-CD
1.
Gently slide the OPEN switch(6) to open the CD Door.
2.
Load the CD or MP3-CD into unit, label side up.
3.
Gently close the CD Door.
4.
The ESP (Anti Shock Function) will be automatically
activated. You can see ESP showing on the LCD display
(15)
5.
The unit will automatically read the CD or MP3-CD.
(For CD, the total track number & elapsed time will
show on the LCD display)
(For MP3-CD, the total folder & total track number
will show on the LCD display)
6.
Press the PLAY button (4) to play the 1
st
track on the CD or
MP3-CD.
