ENG 5
7.
If you want to listen privately, connect your earphones to
the Earphones jack (8)
8.
Adjust the volume by turning the VOLUME knob (7) to your
preferred sound level.
9.
Press the PAUSE button (5) to pause the playback anytime
you want.
10. Press the PAUSE button (5) again to resume playback.
11.
Press the SKIP/SEARCH FORWARD button (10) to skip
forward to thedesired track.
12. Press the SKIP/SEARCH BACKWARD button (11) to skip
forward to thedesired track.
13. Press the STOPbutton (9) at any time to stop playback
14. Press & hold the POWER ON/OFF button (1) to turn off the
unit.
IMPORTANT!
If you cannot hear any sound but the disc is playing, please
check the VOLUME knob (7) is turned up or that the BT
ON/OFF switch (14) is set to the OFF position.
Playinga CD or MP3-CD in a programmed order
1.
Programming can only be done while the unit is at STOP
condition.
2.
Press the PROG button (13)MEM& P01 &00 will show
on the LCD display (15).
(For MP3-CD, 000 will show on the LCD display)
3.
Press the two SKIP/SEARCH buttons(10,11) to select the
track you wish to program.
4.
Press the PROG button (13) to save the selected track to
the P01 position.
5.
Then P02 & 00 will show on the LCD display (15).
