2.
The red LED glows indicating that the battery is being charged. Once it is fully
charged, the Red LED will turn off. It will take around 4 - 5 hours to fully charge the
battery.
Turn on/off the speaker
Press and hold the power button for 2-4 seconds until you hear the indication tone. The
LED light turns on and blinks, and the speaker is now turned on and enters the pairing
mode.
Press and hold the power button for 2-4 seconds to turn off the speaker.
Switch
the speaker to Bluetooth pairing mode
1.
Press and hold the power button for 2-4 seconds until you hear the indication tone.
2.
The LED light turns on and blinks, and the speaker is now turned on and enters the
pairing mode.
(Note: The speaker automatically connects to the previously paired devices)
Pair
the speaker with
your
Bluetooth
device
The speaker can wirelessly stream audio from any Bluetooth enabled device within the
distance of 27-33 feet. Simply follow the below steps.
1.
Press and hold the power button for 2-4 seconds until you hear the indication tone.
2.
The LED light turns on and blinks, and the speaker is now turned on and enters the
pairing mode.
3.
Turn on the Bluetooth function on your device (such as mobile phone, tablet, or
computer).
4.
Your Bluetooth device searches various Bluetooth devices.
5.
The pairing name of this speaker is
Denver BTL-70
. Select the speaker name to pair
with your device.
6.
If required, enter the password ‘0000’ to confirm the pairing.
7.
Once paired successfully, an indication tone can be heard.
8.
If you fail to pair it within the time frame or you want to pair it with a new device,
repeat the steps described above.
Select and play your favorite song on your Bluetooth device, then the music streams to
the speaker.
Listen to
m
usic
w
irelessly
Please ensure that your Bluetooth device (iPhone, Tablet or Other Smart Phone) is
paired with the speaker. When your Bluetooth device is connected to the speaker, play
music on your Bluetooth device, and you can hear music through this speaker.
4
