Denver DAB-45PLUS, Instruction Manual

UK-4

Ensemble/Multiplex (Group name)

The  Ensemble/Multiplex  is  a  collection  of  radio  stations  that  are  bundled  and  transmitted  together  in  a 
single frequency. There are national and local multiplexes, local ones contain stations that are specific to 
that area.

Note:

    Press  and  hold  the 

INFO

  button  for  longer  than  2  seconds,  the  software  version  number  will  be 

displayed.

FM radio

1.       To select FM, press the 

MODE

 button, the display will show FM and the frequency.

2.

To activate auto search, press and hold the 

OK

 control until it starts to scan the frequency band, the 

display will show “Searching … > .” or “Searching … < .”, and it will stop automatically once a station 
has been found. (F. 6) (F. 7)

3.

To activate manual tuning, rotate the

 OK

 control. 

4.

To select the FM stereo/mono reception mode, press the 

OK

 control to toggle between the “Auto” or 

“Mono” selection.  

Note:

  The radio will automatically switch between the stereo and mono reception, but you can override 

this and switch this function manually which is helpful for poor signal reception. During stereo reception, 
the  received  L/R  stereo  sound  will  be  automatically  combined  to  one  single  channel  to  suit  the  single 
speaker design of this radio.

STORING AND RECALLING STORED STATIONS

In either DAB or FM mode, you can store up to 10 stations to the favourite presets; this will enable you to 
get direct access to your favourite stations.
1.        To  store  a  preset,  first  tune  to  your  desired  station,  then  press  and  hold  the 

MEMORY

  button,  the 

display will show “Empty preset 1”, and the preset number will flash. (F. 8) 

2.

Rotate the

 OK

 control to select your desired station preset number.

3.

Press on the 

OK

 control to confirm your selection, the display will show “Preset # saved” (F. 9)

4.

To recall a preset station, first press the 

MEMORY

 button once, then rotate the 

OK

 control to scroll 

up or down the presets that you have stored. When the display shows your desired preset number, 
stop  your  rotation  of  the  control.  If  the  preset  hasn't  been  allocated  a  station,  the  display  will  show 
“Empty preset #”.

FACTORY RESET

When you move the radio to another part of the country, your pre-tuned and stored DAB stations may no 
longer  be  available.  If  this  is  the  case  then  you  will  need  to  reset  your  radio  back  to  its  original  factory 
settings; to perform a factory reset, please do the following:
1. 

Plug the radio to mains and press the

 button to turn the radio on.

2.

Press and hold the 

MENU

 button until the display shows “Press SELECT to confirm reset”.

3.

Release the 

MENU

 button and press on the 

OK

 control once, the display will first show “Restarting 

…” and after the reset is completed, the radio will go to standby.

4.

Press the     button to turn the radio on again, it will then automatically enter into the DAB mode and 

perform  auto  scan  function. After  the  scan  has  finished,  the  radio  will  select  and  display  the  first 
alphanumerically found station. 

Note:

All of your stored DAB & FM presets will be lost once the reset has taken place.  

F6

F7

F8

F9