6.Press play key, start playing.
7.To clear programing. press the "STOP" key,
then press "PROG" key to program state,
then press "STOP" key ,or open the door or
power off.
CD-RW, CD-R, CD Disc playback
Multi-session Disc playback
MPEG 1(ISO/IEC 11172-3) Layer 1/2/3
All MPEG Bit Rates except 8kpbs and free
format
32/44.148KHz Sampling frequency
MPEG 2 Bit Rates except 8kpbs and free
format
16/22.02/24KHz Sampling frequency
Single channel, Dual channel, Stereo and
joint Stereo any combination of intensity
Stereo & MS Stereo Joliet and Romeo format
Support Disc & File:
PROGRAM:
1.At stop state,Press "PROG" key at STOP
state, Then "00" in "PGM 00 00P-01"display
2.Press skip/searched or key to search
the track Number.
3.Press down "PROG" key then "00P" in
"PGM 00 00P-01"
4.Press skip/searched or key to search
the track Number.
5.When desired track is display, press
PROGRAM key to register. Then track no.
display to "00" again.
6.Repeat 2-5 (up to 64 tracks) after register
64 tracks. display shows the first registered
track.
7.Registered tracks can be check by press
"PROG" key, and it can be changed by
repeat 2-5.
8.Press play key, starts playing.
9.To clear programing. press the STOP key
then press "PROG" key to program state,
then press "STOP" key, or open the door or
power off.
MP3 DISC MODE KEY:
REPEAT ONE:
" " light on display
and will repeat the
track you selected.
REPEAT ALBUM:
" ALBUM" Repeat
one directory.
REPEAT ALL ALBUM: " ALL ALBUM"light
on display and will
repeat entire tracks.
INTRO:
At STOP state, press
MODE button until
"INTRO"light on
display plays and will
play the first 10
seconds of each track.
RND:
"RND" light on display
plays every tracks in
random order.
ANTI SHOCK:
"ESP"light on display,
and will anti-shock
about 120 seconds.
NORMAL REPEAT ONE REPEAT ALBUM
RND INTRO REPEAT ALL ALBUM
7
DIR SELECT:
Press ESP/DIR key.
DISC:
If no diSC, then "no
diSC" is display.
Press mode key
