ENG 7
-
Make sure that the surface is level.
-
When you are driving on different terrain, you must slow down.
-
Hoverboard is a driving tool designed for a smooth road. Reduce speed if you drive the hoverboard on a
rough surface.
-
Before driving: Read Chapter 4 on maximum speed and Chapter 5 on safe driving thoroughly
Chapter 3 Pedal Sensor and Indicator operation
3.1. Pedal sensor
The hoverboard has 4 sensors below the pedal, when the operator steps on the pedal, the hoverboard will adjust
itself to a balancing pattern automatically. When riding it, you have to make sure that the pedal is being fully
stepped on, please do not step on the parts outside the pedal. Do not put things on the pedals to make the
hoverboard operate by itself and increase the possibility of crashing and even cause personal injury and damage
to the hoverboard itself.
3.2. Battery & Operation Indicators
The indicator is located in the middle of the hoverboard. It is used for operation information.
-
Battery indicator on the hoverboard will show green color as long as there is sufficient power on the battery to
drive.
-
Battery indicator on the hoverbard will show red color when battery power is down (15-20% left) and you will
you need to stop driving and start to recharge the hoverboard.
-
Battery indicator on the hoverboard will show RED and have WARNING ALARM SOUND when battery power
has run out and you must stop driving immediately. The hoverboard will now shut down without further notice
and the hoverboard will then loose balance. You may have risk to get injured if still try to keep driving.
-
Operation indicator: When the pedal is triggered, the operation indicator will light then the system comes into
operating condition; when the system runs an error, the indicator will turn red.
