INSTALLATION
Installation options:
-6-
To mount the center section on the wall:
Position the bracket on the wall (as shown below) where you
want to hang the center unit. Drill 2 holes slightly undersized
for a firm fit.
Secure the bracket on the wall using 2 dowels and 2 screws
(supplied)
Mount the center unit onto the wall bracket.
Make sure the mounting tab on the center unit fits securely into
the mounting slot on the wall bracket.
Screws and plastic dowels are also provided for speakers if
they are to be wall-mounted away from the center section.
Wall mount
shelf placement
one or both speakers attached or detached
To install center section on a table or shelf:
Insert the base from the back of the unit, push until it clicks
into position.
To connect the speakers with the center section:
Attach left and right speakers to the center section by sliding down
each speaker straight along the side of the center section cabinet.
Connect the left/right speaker lead wires to the speaker terminals.
Pay attention to the polarity. The polarity wires (gray with black
stripe) should connect to the red color terminals.
TO ATTACH THE MAIN UNIT TO
THE BASE
TO RELEASE THE MAIN UNIT
FROM THE BASE
