16
CHANGING AUDIO SOUNDTRACK LANGUAGE
During DVD function, it is possible to change the audio soundtrack language (or encoding
method, channel number) to a different language from the one selected at the initial settings.
This operation works only with discs on which multiple audio soundtrack languages are
recorded.
Notes:
• When the desired language is not selected even after pressing the button several times, it
means this language is not available on the disc.
• When the power is turned on or the disc is removed the language heard is the one selected
at the initial settings. If this language is not recorded on the disc, only the available lan-
guage on the disc will be heard.
• Some discs may not respond to Audio feature.
DVD/CD
1. Press AUDIO during play.
Number of the audio soundtrack language being played back is displayed.
2. Press AUDIO repeatedly until the desired language (or encoding method, channel number)
is selected.
CHANGING SCENES
Some DVDs may contain scenes which have been shot simultaneously from a number of
different angles. For these discs, the same scene can be viewed from each of these different
angles using the ANGLE button. (The recorded angles differ depending on the disc used.)
Notes:
• This function only works for discs having scenes recorded at different angles.
REPEAT PLAY
Repeat viewing (listening)
1. Press REPEAT during playback.
Each time this button is pressed, the TV screen changes as shown below and the disc will
repeat a chapter or title (DVD) or a track (CD).
DVD
Repeat Chapter –> Repeat Title –> normal play
CD
Repeat Track –> Repeat All –> Repeat off
Repeating sections between two specific points (A–B repeat)
2. Press REPEAT A–B during play at the point where repeat play is to start (A).
3. Press REPEAT A–B during play at the point where repeat play is to be concluded (B).
Repeat play of the selection between points A and B starts.
To return to normal play
Press REPEAT A–B once.
