4
3. PICTURE ROTATIONS
Press RIGHT and LEFT navigation buttons to rotate the
picture Clockwise and anti-clockwise respectively.
4. PICTURE FLIP AND TURN
Press UP navigation button to flip the picture up or down.
Press DOWN navigation button to flip the picture left or right.
5. PICTURE ZOOM IN/OUT
Press ZOOM button continuously, the picture zooms in by 2, 3,
4 times or zooms out by 1/2, 1/3, 1/4 the original size.
Press this button once more when the picture getting 1/4 size
to return to the normal play.
If the picture is enlarged, you may use the navigation buttons
to view blocked parts of the picture.
6. SLIDE SHOW TRANSITION MODES
During slide show playback, press the PROGRAM button
cyclically to select one slide show transition effect to play
picture.
EXTERNAL MEMORY MEDIA OPERATION (USB&SD/MMC
CARD)
Prepare the player for External Memory media operation
1. Slide the POWER ON/OFF switch to ON position, Insert a
USB data traveller filled with media files into the USB port
or plug the SD/MMC card into the card slot. After the USB
or the SD/MMC card is successfully detected and read, a
media menu shows on the screen, select a corresponding
media type (picture, audio, video) to play the disc with
navigation left/right button and press OK Button to confirm.
Folders show on the screen and use navigation buttons to
select your desired folder and track to play.
2. Press NEXT or PREVIOUS button to skip forward or
backward.
Note: Press and hold STOP button to make selection among
USB, card and disc via navigation LEFT/RIGHT button,
confirm your selection by pressing OK button.
CAUTION: To avoid electronic static discharge, don't touch
the USB port and card slot during playback.
INITIAL SETTINGS
Initial settings page is for you to make your preferred settings
up for your player. Once the initial settings are done they are
retained in the CPU of the player until otherwise modified.
COMMON PROCEDURES FOR INITIAL SETTINGS
1. Press SETUP button on the remote or press and hold
SETUP button on the unit.
2. Use the navigation buttons to select the item you want to
modify, setting page with further setting items displayed
shows on the TV screen. Again use navigation buttons to
make changes. Press OK button to confirm modifications.
3. Use navigation buttons to switch to another setting on the
main setting page.
4. Press SETUP button on the remote or press and hold
SETUP button on the unit to exit main setting page.
1. SYSTEM SETUP
1.1 TV SYSTEM
- it is used to select the TV mode.
Please select this option as per your TV set.
1.2 SCREEN SAVER
- when the player is not in used for
several minutes, a running DVD logo will move across the TV
screen to protect the TV screen.
Options:
On: Screen saver is enabled
Off: Screen saver is disabled
1.3 TV TYPE
- it is used to select the TV scan mode, please
set as per your TV set.
Options: 4:3PS : Normal Pan & scan mode
4:3LB : Normal Letter box mode
16:9 : 16:9 wide screen mode
1.4 PASSWORD
- input password to unlock the system. The
steps are as follows:
1.4.1 Enter SYSTEM SETUP, select the PASSWORD item by
scrolling the down navigation button, and then press the right
navigation button to select the input box.
1.4.2 Input user's password "0000" to unlock it, in this case,
select the input box again to change the password by
inputting another new four numeric numbers and then press
OK button to confirm. When the password is changed, you
are needed to input the new one to unlock the system.
1.4.3 Once you forget your own password, use the
supervisor's password "8200" to unlock it.
NOTE: If wrong password was input in unlock status, the
system will lock.
1.5 RATING
- Set the rating of this player. If you want to
change the rating of parental lock, please input the password
to unlock first.
Options: 1 KID SAFE / 2 G / 3 PG / 4 PG 13 / 5 PG-R / 6R / 7
NC-17 / 8 ADULT
1.6 DEFAULT
- Reset to factory settings.
Options: RESTORE
2. LANGUAGE SETUP
2.1 OSD LANGUAGE
- It is used to select different On
Screen Display language for different user.
2.2 AUDIO LANG
- Select preferred audio language. (DVD
only, need disc software support)
2.3 SUBTITLE LANG
- Select preferred subtitle language.
(DVD only, need disc software support)
2.4 MENU LANG
- Select preferred disc menu language.
(DVD only, need disc software support)
3. VIDEO SETUP
3.1 BRIGHTNESS
- to set the brightness for the display.
Options: 0/2/4/6/8/10/12
3.2 CONTRAST
- to set the contrast effect for display.
Options: 0/2/4/6/8/10/12
3.3 HUE
- to set the colour impression for display.
Options: -6/-4/-2/0/+2/+4/+6
3.4 SATURATION
- to set the saturation level for display.
Options: 0/2/4/6/8/10/12
4. SPEAKER SETUP
4.1 DOWNMIX
Options: LT/RT - Left/Right mix mode
STEREO - Select this option if you don't have a 5.1
channels amplifier.
