background image

18

While riding, your feet must always be on the foot board.

The Electric scooter can accommodate only one person.

Do not start or stop abruptly.

Avoid riding on steep slopes.

Stop riding the Electric scooter if you hit a solid object (such as a wall or other structure) with it.

Do not ride in dimly lit or dark places.

Ride the Electric scooter at your own risk, we assume no liability for accidents or damage.

Ride at a safe speed that allows you to stop at any time.

Keep the Electric scooter at a sufficient distance from other people and avoid collisions.

Steer through balance shifting, fast movement can result in falls.

Do not ride in rain or under other wet conditions. Ride only in dry weather.

Avoid riding over obstacles, if possible, and avoid snow, ice, and slippery surfaces.

Avoid riding over textiles, small branches, and stones, if possible.

Avoid riding in narrow places or in places with obstacles, if possible.

Jumping on and off the Electric scooter will cause damage that is not covered by the warranty.

There is a risk of injury. Injuries and damage due to "trick riding" are not covered by the warranty.

13.6

Charging

Make sure that the Electric scooter, charger, and DC power input of the device are always dry.

Note: To charge this Electric scooter, use SOLELY the supplied XHK-800B-4220 charger with the

following output: 42 V -2 A.

Using a different charger may cause damage to the device and other potential risks.

Use the mains adapter to plug the DC input of the device into a conventional socket.

There will be no light on the charger before charging, when connected to e-scooter the adapter will
light red, and charging has started.

The red indicator lights up when properly charged; if this is not the case, please check the

connections.

Now you can stop the charging cycle. Overcharge shortens the battery life.

The charging process takes up to 3 hours. Do not charge the battery for more than 3 hours. After 3
hours, disconnect the charger from the device and the power supply. Overcharge reduces the
battery service life.

The product must not be charged over extended periods.

Always keep an eye on the device throughout the charging cycle.

Charge the device only at temperatures between 0 °C and +45 °C.

When charging at lower or higher temperatures, there is a risk that the battery performance will be

Summary of Contents for SEL-80125F
























Reviews: