English - 10
2.
Repeat above procedure until all desired tracks have been programmed.
A total of 20 tracks can be stored in memory. After complete
programming, LCD DISPLAY will show “
” and the “PROG”
indicator will blink continuously.
3.
To start the PROGRAMMED playback, press the CD PLAY/PAUSE BUTTON
once and the CD PLAY INDICATOR “
” will light up.
4.
To check the program you have stored after complete programming,
press the PROGRAM BUTTON step by step during CD stop mode.
Note : While PROGRAM INDICATOR is flashing, never press the CD
STOP BUTTON otherwise all programmed memory will be
cancelled automatically.
5.
To cancel the PROGRAMMED memory :
¾
Press the PROGRAM BUTTON once, “PROG” indicator is flashing on
the LCD DISPLAY, then press the CD stop BUTTON.
OR
¾
Open the CD Door during the CD stop mode.
RECORDING FROM CD PLAYER
1.
Slide the FUNCTION SWITCH to “CD” position.
2.
Put a CD into the CD compartment with the label side upward.
3.
Insert a cassette into the CASSETTE COMPARTMENT and press PAUSE
BUTTON of the cassette deck.
4.
Press RECORD BUTTON and PLAY BUTTON simultaneously for recording
stand-by. With the built-in ALC, the best recording quality is adjusted
automatically.
5.
Activate the CD player, playing in a desired TRACK as described in the
COMPACT DISC PLAYER OPERATION section. Release the PAUSE BUTTON
of the cassette deck to start recording.
6.
To stop recording temporarily, press the PAUSE BUTTON. To continue
recording, press the PAUSE BUTTON again.
7.
Press STOP/EJECT BUTTON of the cassette deck to stop recording. Then
stop CD playback by pressing the CD STOP BUTTON of the CD player.
