Denver TFD-1513, Owner'S Instruction Manual

3

Thank you very much for your purchase of this product, the most natural Colour Television Receiver.
To enjoy your set to the full from the very beginning, read this manual carefully and keep it handy for ready
reference.

INSTALLATION

Locate the receiver in the room where direct light does not strike the screen.

Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is 
recommended for comfortable viewing.
    Allow enough space between the receiver and the wall to permit ventilation.
    Avoid excessively warm locations to prevent possible damage to the cabinet or premature component 
failure.
    This TV operates on a DC supply provided by the AC-DC adaptor. The voltage is as Indicated on the label
on the back cover.Only use the AC-DC adaptor supplied with the TV and never apply an AC mains to the TV
directly. The AC-DC adaptor operates on and AC mains supply, the voltage is as indicated on the label of 
the AC-DC adaptor. Connect the DC plug of the AC-DC adaptor to the DC 12V socket at the back of the TV. 
Connect the AC-DC adaptor and its mains cord. Insert the mains plug in the wall  socket  having a  mains 
 voltage  of 110-240V.
    Do not install the receiver in a location near heat sources such as radiator, air ducts, direct sunlight ,or
in a place somewhere like close compartment and close area.
    Do not cover the ventilation openings when using the set.

CAUTION

Never tamper with any components inside your set, or any other adjustment controls not mentioned in
this manual. The LCD panel used in this product is made of glass. Therefore,it can break When the product
is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the LCD panel 
breaks.When you clean up dust or stick of a water drop on the LCD panel. The power cord should be pulled
out from the plug receptacle, then wipe the receiver with dried soft cloth .During thunder and lighting ,
unplug the power cord and antenna cord to prevent your TV set from damage. All television receivers are 
high voltage instruments. All 

"

inside work

"

 on your receiver should be performed only by the TV service 

personnel.
If some abnormal phenomena happens , may be you have some mis-opertion,please take off power and 
restart  your  TV set .

INSTALLATION

WARNING: 

TO REDUCE  THE  RISK  OF  ELECTRIC  SHOCK  DO  NOT  EXPOSE THIS

                      APPARATUS TO  RAIN OR MOISTURE AND OBJECTS  FILLED WITH LIQUIDS,
                      SUCH AS VASES, SHOULD NOT BE PLACED  ON THIS APPARATUS.    

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

WARNING

: TO REDUCE  THE  RISK  OF  ELECTRIC  SHOCK  DO  NOT  

REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE.
REFER  SERVICING  TO QUALIFIED SERVICE PERSONNEL.

The lighting  flash with arrow head within a triangle is intended to tell the user that 
parts inside the product are a risk of electric shock to persons.  

The exclamation point within a triangle is intended to tell the user that important 
operating and servicing instructions are in the papers with the appliance.  

IMPORTANT SAFETY INSTRUCTION