If you uses PPPoE mode, you need to make the above setting.
Service Name
It will be provided by ISP.
User
Input your ADSL account.
Password
Input your ADSL password.
Notice:
1) Click “Apply” button after finished your setting, IP Phone will save the
setting automatically and new setting will take effect.
2) If you modify the IP address, the web wills not response by the old IP
address. Your need input new IP address in the address column to logon in
the phone.
3) If networks ID which is DHCP server distributed is same as network ID
which is used by LAN of system, system will use the DHCP IP to set WAN,
and modify LAN’s networks ID (for example, system will change LAN IP from
192.168.10.1 to 192.168.11.1) when system uses DHCP client to get IP in
startup; If system uses DHCP client to get IP in running status and network
ID is also same as LAN’s, system will refuse to accept the IP to configure
WAN. So WAN’s active IP will be 0.0.0.0.
8.3.2.2
LAN
LAN Config
Field name
explanation
IP Address
Specify LAN static IP.
Subnet Mask
Specify LAN Netmask.
DHCP Service
Select the DHCP server of LAN port or not. After you
modify the LAN IP address, phone will amend and
adjust the DHCP Lease Table and save the result
