www.denwaip.com
To enable or disable Call Waiting.
·
Call Waiting Enable: If enabled, it allows IP phones to
receive a new incoming call when there is already an
active call.
·
Call Waiting Tone: If enabled, it allows IP phones to play
the call waiting tone to the waiting callee.
Auto redial allows IP phones to redial an unsuccessful
call for designated times within designated interval.
·
Auto Redial: To enable or disable auto redial feature.
·
Auto Redial Interval: Determine the interval between
two consecutive attempts.
·
Auto Redial Times: Determine how many times to
redial.
Remote Control allows specific host to interact with IP
phone by sending HTTP or HTTPS requests. The specific
action could be answering an incoming call, hangup an
ongoing call and so on.
·
Allowed Access IP List: To configure the allowed host
address.
Note: For now, IP phone can only support IP address, IP
address list and IP address pattern as allowed hosts
·
DND(Do Not Disturb) allows IP phones to ignore any
incoming calls.
·
Return Code when DND: Determine what response
code should be sent back to server when there is an
incoming call if DND on.
·
DND On Code: The Code used to turn on DND on
server’s side, if configured, IP phone will send a SIP mes-
sage to server to turn on DND on server side if you press
DND when DND is off.
·
DND Off Code: The Code used to turn off DND on
server’s side, if configured,IP phone will send a SIP mes-
sage to server to turn off DND on server side if you press
DND when DND is on.
Call Waiting
Auto Redial
DND
Remote Control
Description
Sections
