Denzel 26121, User Manual

6

CORDLESS DRILL/DRIVER 

EN

b)  Do not use the electric tool if its switch cannot be set to the “on” or “off” position. Electric tool with a broken 

switch is dangerous and must be repaired.

c)  Unplug the electric tool from the power outlet and/or remove battery before adjusting, replacement of 

accessories or when storing electric tool.  Such precautions reduce the risk of an accidentally turning on of the 
electric tool.

d)  Store unused electric tools out of the reach of children and do not let persons who are not familiar with electric 

tool or these instructions work with electric tools. Electric tools are dangerous in the hands of inexperienced 
users.

e)  Check an electric tool regularly. Check alignment accuracy and ease of movement of moving parts, integrity of 

parts and any other elements of the electric tool affecting its work. Do not use a broken electric tool until it is 
completely repaired. Most accidents are the result of insufficient maintenance of the electric tool.

f)  Watch out for sharpness and cleanness of cutting accessories. Sharp-edged accessories allow avoiding jamming 

and make work less tiring.

g)  Use electric tool and accessories in accordance with this manual and taking into account the working conditions 

and nature of future work. Misuse of the electric tool can create a hazardous situation.

Maintenance

Your electric tool must be repaired only by qualified specialists using original spare parts. This will ensure safety 
and reliability of your electric tool in further use. 

Special safety warnings when working with battery machines 

a)  Battery charge should be done using the charger specified by the manufacturer (supplied). Charger suitable for 

one type of battery may cause fire when using a different type of battery;

b)  Power supply of tools should be carried out only from rechargeable batteries compatible with this model of 

machine and recommended by the manufacturer. Using any other batteries may cause damage and fire;

с)  If the battery is not used keep it separate from the machine and metal objects such as paper clips, coins, keys, 

nails, screws, etc. that can accidentally close the contact pins. Short circuit of the contact pins of the battery may 
cause burns or fire;

d)  The machine has an independent power source (battery) and always ready to go. Avoid pressing the switch 

accidentally – it may cause injury and other damage;

e)  Do not open the battery; there is a danger of a short circuit, which could cause fire or explosion;
f)  Protect the battery from high temperatures, prolonged exposure to direct sunlight and fire. There may be an 

explosion hazard;

g)  When performing operations in which the contact of fasteners (twisted screws or screws) with hidden wiring is 

possible, hold the machine only on insulated surfaces designed to hold by hand. When they come into contact 
with the live wire, accessible metal parts of the machine are energized, whereby the operator may be shocked 
by electrical current;

h)  Use appropriate metal detectors and detectors to determine the locations of hidden wires and / or ask for 

help to the appropriate public utility. Contact with electrical wiring may cause electric shock and fire; pipeline 
damage – to an explosion; damage to plumbing – to property damage;

i)  Hold the machine firmly in your hands. When screwing /unscrewing screws, high reactive moments may occur 

for a short time;

j)  The workpiece must be secured in the clamping devices or vice; thus, it is held more securely than in the hands;
k)  Do not let the machine out of your hands until a complete stop of the working tool. Rotating tooling on an 

uncontrolled machine may cause injury or damage to property.

Autogoods “130”

130.com.ua