Denzel 26612, User Manual

2

ROTARY HAMMER

EN

PROPER USAGE AND GENERAL INFORMATION

Electrical Rotary Hammer is designed for hammer drilling in bricks, concrete and rocks, the destruction of brickwork, 
punching strobes and grooves in concrete, stone, brick and also for drilling into different constructional materials.
The tool is designed for usage at an environment temperature from 0 °С to 40 °С, relative humidity not more than 
80% and a lack of direct exposure of atmospheric condensation and excessive air dustiness.
Rotary Hammer is suitable only for private use and must be used in intermittent duty not more than 20 hours per 
month. It is recommended to use on-loading not more than a nominal, for 10-15 minutes and then to have a break 
for 20-30 minutes. This usage mode enables to complete domestic tasks effectively and prevents the tool from 
a premature coming out of order.
This manual contains the information and the requirements necessary and sufficient for a sure, effective and secure 
use of the rotary hammer.
Due to constant improving of the tool the manufacture reserves the right to make minor changes in its construction, 
not mentioned in this manual and not worsening its consumer and operational properties, effective and secure use. 

COMPLETENESS OF SET

The set contains:
1.  Electrical Rotary Hammer 

1 pc.

2.  Side handle 

1 pc.

3.  Depth gauge  

1 pc.

4.  Dust collector  

1 pc.

5.  Drill bit SDS+8x150 mm 

1 pc.

6.  Drill bit SDS+10x150 mm 

1 pc.

7.  Drill bit SDS+ 12x150 mm 

1 pc.

8.  Flat chisel SDS+14x250 mm 

1 pc.

9.  Point chisel SDS+ 14х250 mm 

1 pc.

10. Container with grease 

1 pc.

11. Set of spare carbon brushes  

1 pc.

12. Instruction manual 

1 pc.

13. Warranty card  

1 pc.

14. Packing box 

1 pc.

SPECIFICATIONS

Parameter    

Value

Maximum drilling diameter in concrete, mm

30

Maximum drilling diameter in wood, mm

40

Maximum drilling diameter in steel, mm

13

Impact energy, J

5

The number of operational modes 

3+1

Safety clutch 

 Yes

Type of chuck 

SDS-plus

Speed adjustment 

 Yes

No load speed, min

-1

0-850

Impact rate, min

-1

0-4500

Power, W

1250

 Rated voltage, V

230

Frequency, Hz

50

Cable length, m 

3

Power indicator 

 Yes

Indicator of carbon brushes runout

 Yes

Protection class

IP20

Sound pressure level  (LpA), dB

72

Vibration level (ah), м/с

2

3,5

Degree of protection against electric shock

II

Weight net, kg

5,0

 Weight gross, kg

6,7