Denzel 26620, User Manual

4

ROTARY HAMMER

EN

b)  While working use personal protective equipment. Always wear safety glasses. Timely using of protective 

equipment such as: dust mask, boots with non-slip sole, safety hat or noise protection headphones, significantly 
reduces the risk of injury.

c)  Do not allow unintended start. Before plugging in electric tool and/or connecting it to battery lift or move it, be 

sure the switch is in the off position. Do not carry electric tool with the trigger switch pressed and do not plug 
the electric tool into a power outlet if the switch is set to "on". This may lead to an accident.

d)  Before turning on the electric tool remove from it all adjusting keys or spanners. An adjusting key or spanner 

left fixed on the rotating part of the electric tool can cause severe injury.

e)  Work in a steady posture. Always keep your balance and a steady posture. This will allow you not to lose control 

when working with electric tool in an unexpected situation.

 f)  Dress properly. Do not wear loose clothes or jewelry while working. Make sure your hair, clothing or gloves are 

at a constant distance from the rotating parts of the tool. Loose clothes, jewelry or long hair can get into the 
rotating parts of the tool. 

g)  If the electric tool is equipped with a dust collection and removal device, make sure this device is properly 

connected and used. The use of a dust removal device significantly reduces the risk of an accident due to a 
dusty working space.

Use of electric tools and technical care 

a)  Do not overload the electric tool. Use your tool for its intended purpose. The electric tool works safe and secure 

only if you keep to the parameters specified in its technical specifications. 

b)  Do not use the electric tool if its switch cannot be set to the “on” or “off” position. Electric tool with a broken 

switch is dangerous and must be repaired.

c)  Unplug the electric tool from the power outlet and/or remove battery before adjusting, replacement of 

accessories or when storing electric tool.  Such precautions reduce the risk of an accidentally turning on of the 
electric tool.

d)  Store unused electric tools out of the reach of children and do not let persons who are not familiar with electric 

tool or these instructions work with electric tools. Electric tools are dangerous in the hands of inexperienced 
users.

e)  Check an electric tool regularly. Check alignment accuracy and ease of movement of moving parts, integrity of 

parts and any other elements of the electric tool affecting its work. Do not use a broken electric tool until it is 
completely repaired. Most accidents are the result of insufficient maintenance of the electric tool.

f)  Watch out for sharpness and cleanness of cutting accessories. Sharp-edged accessories allow avoiding jamming 

and make work less tiring.

g)  Use electric tool and accessories in accordance with this manual and taking into account the working conditions 

and nature of future work. Misuse of the electric tool can create a hazardous situation.

Maintenance

Your electric tool must be repaired only by qualified specialists using original spare parts. This will ensure safety 
and reliability of your electric tool in further use. 

Additional Safety Rules when working with Electrical Rotary Hammer

•

Wear ear protectors. Noise exposure may cause hearing loss.

•

Use extra handles, supplied with the tool, when working. Loss of tool control may cause serious injury.

•

 Hold electric tool for insulated handles when performing operations during which working tooling can touch 
the hidden wiring or its own cable. A contact with live wire may cause voltage on metal parts of electric tool, 
which creates danger of electric shock. 

•

 Use clamps or other devices for fixing the workpiece installing them only on a fixed surface. If you hold the 
workpiece by, you can lose control over the tool or workpiece. 

•

 Wear safety glasses or other eye protection. When drilling with an impact, material particles scatter in all 
directions. Scattering particles can damage the eyes. When performing operations during which dust appears 
wear a protective mask or a respirator. When performing most operations it is recommended to wear noise 
headphones or other ear protection. 

Autogoods “130”

130.com.ua