Notice SecurAccess PMR
34
2. How to use it
2.1. Identification of the dialing buttons
The dialing buttons are always numbered from right to left and top to bottom from M1 to M8
regardless of the number of buttons available. Only models with keyboard have an additional lower
button named gate button and allowing opening the door by entering keypad code.
2.2. Calling
- By using the off-hook/memory button : -> (Automatic dialing)
To go off-hook, simply press any of the off-hook/memory buttons. The unit will automatically turn to
“speakerphone” mode and the number stored into its memory if any will be dialed out, the orange
icon will light up and the message “call in progress” will be clearly announced.
If the other party does not answer and if several numbers have been stored into this memory, the unit
will automatically dial the following number stored, the orange icon will light up and the message
“next call” will be clearly announced If chain dialing is activated, the sequence of number will be
repeated several times (see “Chain dialing” section § 12.8.).
The conversation will be in the “speakerphone” mode, the blue icon will light up.
When the call is over, you can hang up the SecurAccess PMR by pressing again the off-hook
memory button or, the unit will automatically hang up by detecting busy tone or a reversed polarity,
the blue icon will blink end the message “call completed” will be clearly announced.
- By using the keypad :
-> (manual dialing) only with keypad model
To go off-hook, simply press the dedicated button without memory number. The unit will automatically
turn to “speakerphone” mode. The keypad will be used to dial the number to call, the orange icon
will light up and the message “call in progress” will be clearly announced.
If the other party does not answer and if several numbers have been stored into this memory, the unit
will automatically dial the following number stored, the orange icon will light up and the message
“next call” will be clearly announced. If chain dialing is activated, the sequence of number will be
repeated several times (see “Chain dialing” section § 12.8.).
The conversation will be in the “speakerphone” mode, the blue icon will light up.
When the call is over, you can hang up the SecurAccess PMR by pressing again the off-hook
memory button or, the unit will automatically hang up by detecting busy tone or a reversed polarity,
the blue icon will blink end the
message “call completed” will be clearly announced.
2.3. Answering a call
Each time the unit is called; the ringer will be activated except if a no ring setting has been selected.
To answer a call, press any of the off-hook buttons or let the unit go automatically off-hook once the
number of selected rings before automatic answer has been reached.
Once off-
hook, the conversation will be held in the “speakerphone” mode.
When the call is over, you can hang up the SecurAccess PMR by pressing again an off-hook memory
button or, the unit will automatically hang up by detecting busy tone or a reversed polarity.
When the unit is called, icons display and digital announcement are desactived.
2.4. Automatic line disconnection
This may happen during the dialing process or during a conversation in the following cases:
