SonnerieHD SIP – User Guide
21
Setting
Factory setting
Outgoing call without registration
No
Local SIP Port
FXS : 5060
FXO : 5062
RFC 2543 Hold
Yes
SIP Account
Advanced
Enable Call Features
No
Use NAT IP address
blank
VAD
No
Symetric RTP
No
Subscribe for MWI
No
Anonymous Call Rejection
No
Session Expiration
180 sec
Min-SE
90 sec
Management
Auto provision
Firmware Server Path
address_ip_server_provider/fm
Config Server Path
address_ip_server_provider/cfg
Management
Configuration
Syslog Level
None
3.2 Phone settings via Web interface
The SonnerieHD SIP comes out of factory in DHCP mode, the IP address is automatically
renewed.
To find IP address, according to the model with its internal or external keypad:
- Pick up the handset and dial ***
- dial 02
- listen and note IP address.
You can also use a tool like ‘Wireshark’ to find IP address, then enter this address into
the address bar of your internet browser (ex
with default password :
admin).
Your computer has to be on the same network segment that your phone in order to
access to the setting page. Contact your network administrator if you have any doubt.
- Network setting :
