SonnerieHD SIP – User Guide
22
In ‘Home’ interface, select ‘Status’, to consult the configuration.
In web interface, select ‘Network
Basic’.
DHCP:
By default, the phone will try to contact a DHCP server, in your network to obtain
valid network settings (IP address, subnet mask, Gateway, DNS, etc).
PPPoE:
if you use a xDSL modem, you can connect the phone to internet in PPPoE
mode. Please contact your IAP to obtain the login and password.
Satic IP Address:
if the phone cannot be connected to a DHCP server, you must
manually enter the network settings in this section.
Note:
Please pay attention, wrong network settings may prevent the access to your
phone, and the inefficiency of your network. Contact your network administrator if you
have any doubt.
- SIP account settings
:
In web interface, select ‘Account
Basic’. The following settings will appear and can be
modified:
Account active
: Choose No /Yes to active/enable the account.
SIP server
: Proxy, server data for registration, provided by IAP.
SIP user ID
: Account, information about user account, provided by IAP.
Authenticate ID
: Extension, for authentication purpose, provided by IAP.
Authenticate password:
Password, for registration, provided by IAP.
3.3 Lightning setting
The HD SIP ringer has the possibility to have a lighting that can be configured in 4 different
combinations according to the position of the 2 miniature switches 3, 4, (see pictures on pages
6&next) :
4 possible combinations:
A = No lighting at idle and flashing.
B = Lighting at idle and flashing.
C = No lighting.
D = Permanent lighting
3 :
Désactivation
clignotement
4 :
Eclairage
repos
Sonnerie en cours
Poste au
repos
Combinaison
N°
OFF
OFF
Clignotement sur
réception d’appel
LEDs
éteintes
A
OFF
ON
Clignotement sur
réception d’appel
LEDs
allumées
B
ON
0FF
Pas de
LEDs
C
4 : Lightning at idle
3 : Disable blinking while ringing
