SonnerieHD SIP – User Guide
24
The SIP HD Ringtone produces a powerful sound,
sometimes typed alarm. Please take the necessary
safety measures during installation and use.
3.6 Restore to standard factory settings
You can proceed with total reset operation of the unit, all settings will return to factory
settings, by:
the web interface
: in Super user mode
-
select ‘Management
Upgrade’,
-
click on ‘Reset to factory’ button,
- then the device will be restored and reboot.
the reset key :
It is located on the main PCB inside the unit.
- press about 20 sec. the reset key,
- then disconnect and reconnect the Ethernet cable (PoE) or the power supply. The
device will be restored and reboot.
4
Ringger settings on web interface
The ringer can be configured to be used as a peer to peer or SIP server. There are two
modes. Call group mode and call supervision.
In any case, you can choose the default ring tone. To do this from the ringtone web page
in account -> advanced :
Account Ring Tone :
Ring tone choice
Ring Timeout :
choice of
ringing time (IPBX settings may influence).
4.1 In SIP server
!
Restoring to factory default settings will delete all configuration
information of the device.
!