LIGHTBULB CHANGE:
•
Always let bulbs cool down to avoid risk of burning
.
•
Bulbs should only be change when the product is disconnected from the electricity
supply
.
•
Bulbs should not be damaged during the exchange. Also make sure that the bulb is
secure in the fixture.
•
Disconnect the illuminated stool from the mains
.
•
Rotate the lamp 180 degrees so that the metal inset in the lower flat part of the
product is visible
.
•
On the metal plate displaying the type description there are two screws
.
These
should be loosened using a suitable screwdriver
.
•
The light element can now be removed and the bulb can be exchanged.
•
The product can be re-constructed for use (in the reverse order).
•
Attention !
The screws should be tightened securely in order to achieve a good
pressure seal. The cable should be laid in the special groove intended for this
purpose.
TECHNICAL INSTRUCTIONS AND DATA:
Voltage:
220 - 240 V / 50 Hz
Opening diameter for bulb: 55mm
Lightbulb recommendation:
EGGO S
Ø
30cm
General usage candle lamp bulb
max. wattage 25 W / E14
EGGO M
Ø
55cm
General usage candle lamp or drop shaped bulb
matt or Superlux Crypton Type
max. wattage 60 W / E14
EGGO L
Ø
78cm
Halogen bulb / Halolux-Ceram + socket matt
max. wattage 150 W / E27
ATTENTION! Energy saving lamps are not dimmable!
