Shenzhen Dericam Technology Co., Ltd
H502W User Manual
www.dericam.com
15
Frame rate:
Set the current video frame rate. User can change the frame rate to limit
network traffic and achieve more fluent image sequence.
IR-LED:
User can turn on or turn off the infrared lights manually, but for most of conditions,
auto mode is best choice.
Note:
If you turn off the LED at night, you will see full dark, except you can add another in-
frared device around.
Light Mode:
Set the video light mode, and remove the jitter impact of the image as per the
electricity frequency. The following three modes are used: 50Hz/60Hz /outdoor mode. Gen-
erally, indoor mode use 50Hz or 60Hz, outdoor mode should be set as per the real camera
working environment.
Vertical flip:
the video upside down.
Horizontal flip:
Reverse the video.
Mute:
Close the sound of the IP camera.
Video Panel:
Shortcut function keys will be displayed on monitor screen, which can take
photos, record and realize the function of voice intercom.
Sound Alarm:
If selected, when the alarm device is triggered, computer sound alarm. If
not, computer is mute.
Connection:
Connect the selected device address, and display images in the current
window
Disconnect:
Disconnect the selected video connection, and stop displaying video. If video
recording is ongoing, the operation will stop simultaneously.
Snapshot.
Photograph the selected device and save the photographed image.
