Shenzhen Dericam Technology Co., Ltd
H502W User Manual
www.dericam.com
37
The device also supports third-party domain name resolution, currently supports
www.3322.org and
. If users need a third party domain solution, can access
the appropriate site and apply for the dynamic domain. Then, fill the applied domain infor-
mation in the camera.
Next, we introduce how to do port mapping on router. Two methods are available.
1. Mapping port automatically via UPnP on router.
2. Establish virtual server via setting router.
Above two methods can be finished on GUI web page of the router. We recommend No.1
solution.
13.3 Use UPNP Map the Port:
If user select No.1 solution, he/she should ensure the router support UPnP protocol, and
enable UPnP port mapping feature, the following introduction takes LinkSYS router as ex-
ample to show how to activate UPnP port mapping function and how to establish a virtual
server.
If you use LinkSYS routers, please refer to this note.
13.3.1. In the browser, type the router’s IP address (E.g. http://192.168.1.1, router IP ad-
dress usually written on the router shell label paper, please ensure your own IP address),
open the router GUI page "forwarding rule" >> "UPnP Settings" to ensure that the current
UPnP state is "opened" as shown below:
