www.dero.com | 1-888-337-6729
© 2018 Dero
Once all the panels are properly placed, tighten
all the upright anchors and bolts attaching the
trusses. The carriage bolts attaching the DD
beams can also be tightened.
Place the first row of type S decks and fasten
with (6) self-drilling screws each to the purlins and
trusses. Each deck will provide 30” of coverage;
the last deck will overlap more. Place the second
row of type S decks and fasten with (6) self-drilling
screws each.
Attach door with (4) hinges and (8) ¼” x 1”
thread-cutting screws each. A 7/32” pilot hole
will need to be drilled for each thread-cutting
screw. Lubricate each thread-cutting screw
before installing. The door bottom should be
4.5” off the ground and the door front should
be flush with the uprights. See individual
product instructions to install door trim, crash
bar, door closer.
Install front and side louvers with (4) ¼” x 5”
bolts, (4) washers, (4) lock washers, and (4) nuts.
Tighten all.
9
11
12
10
CYCLE STATION
Installation Instructions
