MODEL 268A-1
WARRANTY
Monroe Electronics, Inc., warrants to the Owners, this
instrument to be free from defects in material and
workmanship for a period of two years after shipment
from the factory. This warranty is applicable to the
original purchaser only.
Liability under this warranty is limited to service,
adjustment or replacement of defective parts (other
than tubes, fuses or batteries) on any instrument or
sub-assembly returned to the factory for this purpose,
transportation prepaid.
This warranty does not apply to instruments or sub-
assemblies subjected to abuse, abnormal operating
conditions, or unauthorized repair or modification.
Since Monroe Electronics, Inc. has no control over
conditions of use, no warranty is made or implied as to
the suitability of our product for the customer's
intended use.
THIS WARRANTY SET FORTH IN THIS ARTICLE IS
EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES AND REPRESENTATIONS, EXPRESS,
IMPLIED OR STATUTORY INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. Except for
obligations expressly undertaken by Monroe
Electronics, in this Warranty, Owner hereby waives and
releases all rights, claims and remedies with respect to
any and all guarantees, express, implied, or statutory
(including without limitation, the implied warranties of
merchant-ability and fitness), and including but without
being limited to any obligation of Monroe Electronics
with respect to incidental or consequential damages, or
damages for loss of use. No agreement or
understanding varying or extending the warranty will be
binding upon Monroe Electronics unless in writing
signed by a duly authorized representative of Monroe
Electronics.
In the event of a breach of the foregoing warranty, the
liability of Monroe Electronics shall be limited to
repairing or replacing the non-conforming goods and/or
defective work, and in accor-dance with the foregoing,
Monroe Electronics shall not be liable for any other
damages, either direct or consequential.
RETURN POLICIES AND PROCEDURES
FACTORY REPAIR:
Return authorization is required for factory repair work.
Material being returned to the factory for repair must
have a Return Material Authorization number. To
obtain an RMA number, call 585-765-2254 and ask for
Customer Service.
Material returned to the factory for warranty repair
must be accompanied by a copy of a dated invoice or
bill of sale, which serves as a proof of purchase for the
material.
Repairs will be returned promptly. Repairs are
normally returned to the customer by UPS within ten
working days after receipt by Monroe Electronics, Inc.
Return (to the customer) UPS charges will be paid by
Monroe Electronics on warranty work. Return (to the
customer) UPS charges will be prepaid and added to
invoice for out-of-warranty repair work.
EXPEDITED FACTORY REPAIR:
All material returned to the factory by air or by an
overnight service will be expedited. Expedit-ed factory
repairs will be returned to the customer by the same
mode of transportation by which the material was
returned to the factory for repair (i.e., material returned
to the factory by an overnight service will be returned
to the customer by an overnight service).
NOTE: Return (to the customer) transportation
expenses for expedited factory repairs will always be
at the expense of the customer despite the warranty
status of the equipment.
FACTORY REPAIRS TO MODIFIED EQUIPMENT:
Material returned to the factory for repair that has been
modified will be not tested unless the nature and
purpose of the modification is understood by us and
does not render the equipment untestable at our repair
facility. We will reserve the right to deny service to any
modified equipment returned to the factory for repair
regardless of the warranty status of the equipment.
MONROE ELECTRONICS, INC.
100 HOUSEL AVENUE
LYNDONVILLE, NEW YORK 14098
PHONE (716) 765-2254 (800) 821-6001
FAX (716) 765-9330
