TB-3043
Page 6 of 6
© 2019 DESCO INDUSTRIES INC
Employee Owned
DESCO WEST
- 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178
DESCO EAST
- One Colgate Way, Canton, MA 02021-1407 • (781) 821-8370 • Website:
Figure 7. Shorting the ionizer’s fan grill with a metal
probe to test the alarm
Specifications
The comparative efficiency of benchtop ionizers is
determined by a standard test published by the ESD
Association: ANSI/ESD STM 3.1. Typical positive and
negative discharge times (1000V - 100V) measured
using this standard are shown in Figures 5 and 6. The
performance of the ionizer was measured with the unit
positioned as shown, with the fan speed on high and without
a filter.
Input Voltage and
Frequency
Internally selectable for
100-120 VAC, 50/60 Hz or
220-230 VAC, 50/60 Hz
Power Consumption
12 W
Dimensions
(including stand)
9.5" H x 6.0" W x 3.1" D
(241 mm x 152 mm x 79 mm)
Weight
4.5 lbs (2.0 kg)
Balance (Offset
Voltage) at 12"
±3 V typical
±25 V maximum
Neutralization
(Discharge) Time at 12"
< 2 seconds
Airflow
Three-speed fan
50-100 CFM
Emitter Points
.050" diameter tungsten
Ion Emission
Steady-state DC with sense
feedback
Fuse
250 mA slow blow
High Voltage Power
Supply
5.5 kVDC nominal
Ozone
<0.05 ppm
Enclosure
Powder coated aluminum
Country of Origin
United States of America
Accessories
60509 IONIZER MOTION SENSOR
Desco Ionizer Motion Sensor as
an accessory for the High Output Benchtop Ionizer. Use
it to activate the ionizer when an operator is present and
deactivate it when the workstation is vacant. The Ionizer
Motion Sensor conserves energy and reduces ionizer
maintenance.
Limited Warranty, Warranty Exclusions, Limit
of Liability and RMA Request Instructions
See the Desco Warranty -
