17
In this way, the motorized cylinder will shift to Night Mode. To exit from night mode, turn the knob through unlocking way.
It will automatically unlock the door and shift to normal working mode. You can shift to or exit from night mode by using
key as well.
To use Night Mode,
NIGHT MODE AVAILABILITY
and
ADJUSTING SEMI-AUTOMATIC WORKING
settings need to be
enabled. If any of them is disabled, the motorized cylinder cannot shift to Night Mode.
5. MAINTENANCE
You can clean the surfaces with soft fabric. Do not use water or corrosive chemicals. Do not touch to electronic parts of
the device with a conducting metal or sharp object.
5.1. REPLACING MOTORIZED CYLINDER’S BATTERIES
- The motorized cylinder uses 5x AA size 1,5 V Alkaline or Lithium batteries.
- Do not use old and new batteries or different types of batteries together.
- If you are changing batteries, change them all. Use high quality batteries.
If you hear triple warning tone after any operation (locking/unlocking), or if
the motorized cylinder rotates too slowly, you need to replace the batteries. To change them,
open knob screw and remove knob (pull outward), uninstall old batteries and install new batteries
(watch polarities). Put knob back and tighten knob screw.
1
2
