19
- Touch to “Settings” icon located on upper right corner and go to “Users” tab.
- Launch the app on the master phone and connect to the motorized cylinder.
– The motorized cylinder will give two short warning tones and the keypad will be enrolled to the motorized cylinder.
- Launch the app on the master phone and choose the motorized cylinder that you want to generate codes.
- Touch to “Enroll New Controller” and than touch to “green plus” sign on the right. The motorized cylinder will give a long
and then a short warning tone.
After that launch the app on master phone, connect to the motorized cylinder, touch to “Settings” icon located on upper
right corner and go to “Users” tab. If the enrolling process is successful, you will see “Via Keypad” line, besides “Via App”
when you touch to “Create One Time Code” line.
After enabling Time Limited Access Mode on keypad, follow the steps below to enroll it to the motorized cylinder:
- After choosing the role, you will see following titles to set on coming page:
Check In & Out Time:
Default check-in time is 14:00 and check-out time is 10:00. This period is valid for all the time
- After warning tones, wake the keypad up by putting your palm to the touch keys and then enter “2222”.
Guest, Administrator, Room Service, Maintenance, Runner
limited access codes. (To change default values of this setting, you need to connect motorized cylinder via bluetooth)
Usage:
You can choose if the generated password will be a one time (single) or multi time usable during given period.
- Touch to “Settings” icon located on upper right corner and go to “Users” tab.
- To have an enhanced / explanatory usage log, choose one of the following roles for the time limited code:
- Touch to “Create One Time Code” and than “Via Keypad”.
Generating Time Limited Access Code To Use Via Keypad
