51
ENROLL NEW REMOTE CONTROLLER:
Your motorized cylinder may learn up to 40 different controllers. To shift your
motorized cylinder to enrolling new controller mode, touch to “Green Plus” button. In this way, motorized cylinder will
shift to enrolling new controller mode with a long warning tone. After that tone, you need to send locking or unlocking
signal via the new controller that you want to enroll to the motorized cylinder in following ways:
- For fingerprint reader, wake it up and touch to lock button.
- For keypad, wake it up and touch to locking button.
- For remote controller, press any button till you hear a warning tone from cylinder.
- For auto-locker, make the magnet closer to small triangle (look to sides of device) and wait indicatior is lit.
- For enrolling a new mobile phone, please check page 54.
If enrolling will be succesful, you will hear two short warning tones from motorized cylinder.
DELETE ALL REMOTE CONTROLLERS:
If you want to delete all the controllers of motorized cylinder, touch to “Red
Minus” button. The master controller cannot be deleted by using this menu item.
ADJUST NUMBER OF TURNS:
Before using your motorized cylinder, you may need to adjust your motorized cylinder
according to lock’s number of rotation, To do this, close the door and than touch to “Blue Rotating Arrow” button.
Motorized cylinder will lock and than unlock the door and learn number of rotation.
AUTO DISCONNECTION TIME:
You can adjust (with 5 sec. steps) the time period that application stays connected to
motorized cylinder after it is connected.
Summary of Contents for Utopic R
Page 1: ...USER MANUAL Wireless Motorized Cylinder ...
Page 25: ...25 ...
Page 45: ...45 ...
Page 55: ...55 ...
