Total Exhaust Hood
Pg.2
TOTAL EXHAUST HOOD
Thank you for purchasing our Total Exhaust Hood. W ith proper care and maintenance your
hood will provide you with many years of trouble free performance.
Please read instructions carefully before installing and
operating your Total Exhaust Hood.
W ARNING:
To reduce risk of fire, electric shock, or injury to persons please
review the following precautions.
•
Do not expose your hood to rain or moisture.
•
Always disconnect the Total Exhaust Hood from power supply when servicing,
moving parts may cause serious injury.
•
Always disconnect while grasping the plug, not the cord.
•
Do not block airflow to top of unit (allow at least 5” above unit).
•
Do not expose your hood to gaseous or explosive vapors. Motors normally spark
and may ignite fumes.
•
Do not modify the plug of your hood if it will not fit in your duplex outlet. Have a
proper outlet installed by a qualified electrician.
•
Use only specified replacement parts recommended by Design Filtration.
•
Use this equipment only in the manner intended by Design Filtration.
1.
Shipping and Un-Crating
Your Total Exhaust Hood normally is shipped in two sections; smaller units may come fully
assembled. Units should be stored in heated conditions of between 4
/
(40
/
) and 32
/
C
F
C
(90
/
) to avoid undue structural fatigue and damage.
f
Each unit is factory tested for airflows and filter leaks prior to shipping. On occasion damage
can occur during the transportation of your new Total Exhaust Hood. Carefully remove the
crating from your hood and inspect for damage that may have been caused and report it
immediately to your transportation company.
All shipments are F.O.B. Design Filtration Inc. You must file a claim directly with the freight
carrier. Design Filtration Inc. and its dealers are not responsible for shipping damages.
