background image

2

 Safety 

 

© DESIGNA Verkehrsleittechnik GmbH

 

DESIGNA SMART MOVE_Installation_110_ENG.docx 

 

Safety 

 

2.1 

Intended use 

The application SMART MOVE is part of the DESIGNA PARKING 

MANAGEMENT SOLUTIONS. 
The DESIGNA system was developed for checking entrances and exits in 

parking areas as well as for recording parking times and parking costs, 

including their automated or manual payment.  

The DESIGNA system is used for parking management and offers a 

service (a free parking space) to customers for a stipulated fee. 
The SMART MOVE app from DESIGNA enables easy and convenient 

ticketless parking in car parks throughout Germany. 

 

The beacon technology-based app allows you to manage all ticketless 

season parker processes via your smartphone or tablet. The smart 

device can be used to enter and exit car parks after prior registration. The 

beacons installed in the car parks communicate with the SMART MOVE 

app on your smart device via Bluetooth Low Energy. 

 

 

2.2 

Warnings and occupational health and safety  

Always observe the following warnings

 

to reduce health hazards and to 

avoid hazardous situations. 
 

 

Electric voltage 

 

 DANGER 

Danger of death due to electric shock! 

Contact with live components may result in death. 

 

Installation has to be carried out by electrical technicians or 

DESIGNA electrical technicians or electrical technicians of 

DESIGNA trained and authorized dealers and partners. 

 

Make sure that the power supply is 

externally

 disconnected and 

that it cannot be switched on.  

  Test for absence of voltage. 

 

 

 

Thunderstorm, lightning, 

electric voltage 

 

 DANGER 

Danger of death from lightning and electrical voltage! 

If lightning strikes the device, contact to the device components and 

direct proximity to the device includes mortal danger. 

 

Never install the device during thunderstorms. 

 

Protect yourself in buildings or vehicles. 

 

 

 

Summary of Contents for SMART MOVE
























Reviews: