background image

USER TIPS 

AND NOTES

The Remote Car Starter must be “enabled” each time the driver has finished driving and taken out the key

in order for the unit to start the vehicle remotely

.          After the key has been removed, you must turn OFF the

control switch and then turn it back ON again while no key is in the ignition.  This “control switch” or “set

switch” prevents unauthorized starting of the car by someone unfamiliar with the system who may be

using the vehicle.  If you forget to set the switch, it may also be activated by pushing the transmitter and

holding the button down for ten seconds. T

o

 eliminate the need for this, see Option #7.

The Ready Start!

®

 Remote Car Starter will turn the car off if the driver does not insert and turn the key

within 10 or 15 minutes. 

After the Ready Start!

®

 Remote Car Starter has started your car

, simply put in

the key and turn it to the “run” or “on” ignition position (not the crank position) to drive away

.

The Ready Start!

®

 Remote Car Starter has numerous safety and security features that make it difficult to

steal your car without the key being in the ignition. Putting your car in gear

, pushing the brake pedal or

opening the hood will turn the unit off unless your key is in the ignition and turned to the “run” or “on”

position.

If all features are hooked up, your transmitter will function as follows:

Button

Press Once: Start the car

Press Again: Stop the car

Button

Once:  T

urn on headlights for 30 seconds

Again: T

urn off headlights

Hold 

down for panic alarm.

Button

Once: Lock the door / arm the alarm

Button

Once: Unlock the door / disarm the alarm

Hold down

 for 4 seconds to open the T

runk.

(If you get 4 chirps – that means the alarm was triggered

while you were away)

Button

This is used to operate additional vehicles with Ready 

Start

®

Remote Car Starters as follows:

Press 

once:

To

 operate vehicle #2 

- then any of the 4 but-

tons while LED flashes red and green

Press again:

For vehicle #3 - then any of the 4 buttons while

LED flashes red

Press again:

For vehicle #4 - then any of the 4 buttons while

LED flashes green

Do not press for your ‘main’ vehicle

The transmitter is powered by a long life lithium battery (style #2032). The transmitter and the remote

starter receiver module are FCC and DOC approved.

Alarm Disarm without transmitter

:          

If the doors are locked and the alarm is set and you’ve lost your

transmitter

, you can disable the alarm.  Here is how:  Enter the vehicle (alarm will sound) and insert the

key and turn it to the ‘run’

 position (the position where the dash lights come on).  T

urn the On/Off switch

off and on 4 times in a row to disable the alarm.

V

alet Mode

:          T

urning the Control switch off puts you in V

alet Mode. In V

alet Mode the Remote Car Starter

and the alarm will not function. This lets you turn off the car starter when having the vehicle serviced. The

only functions that work in V

alet Mode are the keyless entry

, lights and panic. The red LED dash light will

flash twice every few seconds when in V

alet Mode.

The Quick Stop Option

:   

Y

ou can leave the car running and take the key with you for a quick visit to a

store. With the car running, push the Start button on the keychain transmitter just before pulling out the

key
. The car will run for 10 minutes or until you tap the brake or put the car in gear

.

TW


YEAR LIMITED 

W

ARRANTY

DesignTech International, Inc.  Warrants to the original consumer/purchaser that this product shall be

free of defects in material and workmanship under normal use and circumstances for a period of  

twotwotwotwotwo

(2)  years from the date of original purchase for use. When the original consumer/purchaser returns the

product to DesignTech International Inc., 7955 Cameron Brown Court, Springfield, Virginia 22153,

USA within the warranty period, and if the product is defective DesignTech International, Inc. will at its

option repair or replace such.

This warranty shall constitute the sole liability of DesignTech International, Inc. concerning the product.

DesignTech International, Inc. expressly disclaims all other warranties INCLUDING, WITHOUT

LIMITATION, THE WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A

PARTICULAR PURPOSE.  NO PERSON, FIRM , OR CORPORATION IS AUTHORIZED TO

ASSUME FOR DESIGNTECH INTERNATIONAL, INC. ANY OTHER LIABILITY IN

CONNECTION WITH THE SALE AND USE OF THE PRODUCT.  DesignTech International, Inc.

and agents and distributors will bear no liability whatsoever for incidental or consequential damages or

charges of any kind.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above

disclaimer regarding incidental or consequential damages may not apply to you.

Please complete the warranty registration card below and mail to:  DesignTech International, Inc., 7955

Cameron Brown Court, Springfield, Virginia 22153 USA within ten (10) days after date of purchase.

This warranty is void if the product or has been damaged or tampered with or if the product or any such

parts have been opened.  In all cases of damage during shipment, a claim must be filed with the shipping

carrier and not with DesignTech International, Inc.

This warranty gives you specific legal rights; you may also have other rights which vary from state to

state.

OUT OF WARRANTY REPAIRSOUT OF WARRANTY REPAIRSOUT OF WARRANTY REPAIRSOUT OF WARRANTY REPAIRSOUT OF WARRANTY REPAIRS

DesignTech International, Inc. will at its option either (1) replace this product with a functionally similar

(but not necessarily visually identical) refurbished product or (2) repair the original product and return

it to the original consumer/purchaser C.O.D. covering all reasonable repair or replacement charges if the

product is returned prepaid to DesignTech International, Inc., 7955 Cameron Brown Court, Springfield,

VIRGINIA 22153, USA after the two year warranty period has expired.

Please return this warranty registration card within ten (10) days of purchase.

Name_________________________________________________________ User's 

Age_________

Address _________________________________________________________________________

City____________________________________ State__________________ Zip_______________

Phone Number:     Home___________________________            Office_______________________

Place of Purchase__________________________________       Date of Purchase________________

Product Purchased:

_24739/24739T/24740

___

Price of Purchase:____________

V

ehicle Mak

e:__________________V

ehicle Model:________________Y

ear:__________

This 

product 

was 

purchased 

for:

( ) Myself            ( ) Spouse           ( ) Relative           ( ) Friend

How did you first become interested in this product?

( ) Retailer Ne

wspaper 

Ad

( ) Magazine 

Ad

In-Store 

Display

Ne
wspaper 

Ma
g

azine 

Article

( ) 

Mail 

Order

( ) Friend / Relative

( ) In-Store Salesperson

( ) 

Other 

_____________________

__________ Please send me 

FREE 

inf
orma

tion on other inno

v

ati

v

e DesignT

ech products.

7955 Camer

on Br

o

wn Cour

t,

 Springf

ield, 

V

ir

g

inia 22153-2809, USA

T

el: 703-866-2000 or 1-800-337-4468     F

ax: 703-866-2001

v4.1

Summary of Contents for Ready start 24739













Reviews: