Page 6 20620
Page 7
20620
How To Use The Scotch-Lock Connector
The diagram below shows how to use the blue Scotch-Lock wire con-
nectors to tap into the desired
wires.
1) Slip the connector over the
wire you want to attach to.
2) Push the Smart Alarm's
®
wire (unstripped) as far as
it will go into the open end
of the connector.
3) Use pliers to press the metal
blade into the wires.
4) Close the plastic cover over
until it clicks.
Yellow
Wire
Your Car's
Headlight Wire
MAKE OF CAR
LOWBEAM WIRE
NISSAN
MAXIMA
RED/YELLOW
TRUCK/PATHFINDER
RED/BLUE
SENTRA/NX2000
RED/YELLOW
240 SX
RED/BLACK
300 ZX
RED/BLACK
STANZA
RED/YELLOW
PORSCHE
PORSCHE
GREEN/YELLOW
SAAB
SAAB 9000
GRAY
SAAB 900
GRAY
SUBURU
SUBURU
RED/YELLOW
SUZUKI
SAMIRAI
RED/WHITE
SIDEKICK
RED
SWIFT
RED
MAKE OF CAR
LOWBEAM WIRE
TOYOTA
TOYOTA CELICA
GREEN
LANDCRUISER
RED/BLUE
CAMRY
RED/BLUE
TRUCK/4-RUN
RED/GREEN
PREVIA
RED/YELLOW
SUPRA
GREEN
MR2
GREEN
CRESSIDA
RED/YELLOW
COROLLA
RED/YELLOW
VOLVO
240
BLUE
740/760
GREEN
940/960
GREEN
VOLKSWAGEN
MOST VOLKSWAGEN
YEL/BLK
Key: LFT=left side of car; RT=right side of car. When different
colors are listed for the two sides of a vehicle, you only need to con-
nect to one of those wires. Where two colors are listed with a slash "/
" seperating them, it is a striped wire (e.g. RED/BLK is a RED wire
with a BLACK stripe).
MAKE OF CAR
LOWBEAM WIRE
HYUNDAI
SONATA
RED/WHITE
SCOUPE
RED/WHITE
EXCEL
YELLOW/BLUE
INFINITY
Q-45
ORANGE
G-20
RED/BLUE
M-30
ORANGE/BLUE
ISUZU
RODEO
RED/GREEN
PICK-UP
RED/BLUE
AMIGO
RED/WHITE
IMPULSE
RED/GREEN
TROOPER
RED/YELLOW
LEXUS
LS-400
RED/WHITE
ES-250
RED/YELLOW
MAZDA
MOST MAZDA
RED/BLACK
323/PROTEGE
RED
MERCEDES
MERCEDES
LFT HD BLK/YEL, RT HD
YEL
MAKE OF CAR
LOWBEAM WIRE
GENERAL MOTORS
MOST GM
TAN
SATURN
TEST
GEO
RED/WH
FORD
MOST FORD
RED/BLACK
CHRYSLER
MOST CHRYSLER
PURPLE/RED
INTREPID
RED/WHITE
LASER/TALON
RED/WHITE
CHRYS TRUCKS
PURPLE
JEEP
GREEN
ACURA
MOST ACURA
RED/YELOW
AUDI
MOST AUDI
LFT BLACK/RT YELLOW
BMW
3 SERIES
LFT YEL-WHI/RT YEL-BLU
5 SERIES
LFT YEL-GRN/ RT YEL-BLU
7 SERIES
LFT YEL-GRN/ RT YEL-BLU
HONDA
MOST HONDA
RED/YELOW
PRELUDE
POP-UP USE PARK RED/BLK
Step 3
+12 Volts
Red Wire
Connect the RED wire with its in-line fuseholder and 15 amp fuse to
the +12 volt ("+") side of the battery terminal. Using our "U" shaped
connecter, simply unscrew the battery terminal connector bolt a few
turns, insert the "U" connector, and re-tighten the bolt.
Step 4
Headlights
Yellow Wire
Connect the YELLOW wire to the low-beam headlight wire coming
off the back of one of the headlights. Use the charts below as a guide-
line to help determine which wire is the correct low-beam wire. (For
cars with 4 head lamps in a line from right to left, the low beam lamp is
always the outer lamp. When the vehicle has 2 lamps, one on top of
the other, the low beam is always the top lamp).
Rule of Thumb: For most two lamp systems and circular four lamp
systems, the YELLOW wire from the Smart Alarm
®
connects to the
wire coming from the middle connector on the back of the (lowbeam)
headlight. On most rectangular four lamp systems, the YELLOW wire
from the Smart Alarm
®
connects to the wire coming from the left con-
nector (as seen from inside the hood area) on the back of the (lowbeam)
headlight. If the chart indicates otherwise for your car, go with the
chart! Note: the chart is only a guide and does not cover all makes and years.
