This Manual is applicable to Soft LED2 XL Vari-White
Revised on June 2020
ILT ITALY srl
Via Cancelliera, 10/a
00041 Albano Laziale (Rome) Italy
tel. +39 06-902901 fax +39 06-90231051
www.desisti.it
1st MENU
Displayed
(
scrolling with the
Ù
and the
Ú
buttons)
2nd MENU
Displayed
(after pressing the
X
that stands for ENTER)
Explanation of Each MENU FUNCTION
DMX ADDRESS
This Function is to SET the DMX address from 1 to 512
The Product is delivered with a default setting of the DMX address at 1.
As indicated next to each picture, it is required to reach the DMX addr
Menu, select the preferred base DMX Address and Select it.
Once the DMX Address is SET, in order to return to the MAIN MENU, it is
necessary to rotate KNOB 2 counter-clock-wise to return to the EXIT item
and then select it by pressing KNOB 2 itself.
The Product is delivered with a default setting of the DMX address at 1.
As indicated next to each picture, it is required to reach the DMX addr
Menu, select the preferred base DMX Address and Select it.
Once the DMX Address is SET, in order to return to the MAIN MENU, it is
necessary to rotate KNOB 2 counter-clock-wise to return to the EXIT item
and then select it by pressing KNOB 2 itself.
1st MENU
Displayed
(scrolling with the
Ù
and the
Ú
buttons)
2nd MENU
Displayed
(after pressing the X that stands for
ENTER)
Explanation of Each MENU FUNCTION
LOCAL DIMMING CONTROL
This function is to LOCALLY DIM THE LED INTENSITY from 0 to 100% (Product is
delivered with default setting of the Dimmer at 0)
he right knob is doing the dimming action and it goes with a fine tuning in normal
condition, or a fast dimming when rotating KNOB 2 while keeping KNOB 1 pressed
in.
CHANNEL SETTING (RESOLUTION & FUNCTION)
This function is to SET THE DIMMING RESOLUTION either at 8 bits or at 16 bits.
Select DMX resol by rotating and pushing KNOB2, the following choices are available:
- 8 bits resolution (the display will show 8 bit). The fixture utilizes 1 DMX Circuit for the
Light Dimming, which is the BASE CIRCUIT set in the ADDRESS.
- 16 bits: 16 bits resolution (the disply will show 16 bit and this is the default setting).
The fixture utilizes 2 DMX Circuits:
The Base Circuit set in the address is the Coarse Dimming, the second Circuit (Base +1)
is the Fine Dimming.
Of course the benefit of the 16 bits function the corresponding circuits on the DMX
Lighting Board shall also beset at 16 bits.
