• Connect via HDMI port:
HDMI will only input
/
output display signal.
To activate touch functionality, connect the monitor to your computer
via either via either a USB 3.0 A to USB
-
C cable or USB
-
C to USB
-
C cable
through which the touch signal from the Desklab will be sent to your
device.
• Connect via USB-C port:
Connect via the USB
-
C cable for data,
display, and touch signal.
3. Touch Screen
NOTE:
For simultaneous power and data transfer, use one
USB-C for data transmission and another for power supply.
The power output of each device can vary. In case of a power
shortage, lower the brightness and volume on the monitor or
use the AC adapter to power the monitor.
You can use single-finger touch or multi-finger touch for up to
10 simultaneous touch points.
If your laptop or device is not already touch screen enabled,
Desklab's touch function may not be compatible. Devices like
Macbooks are not touch screen enabled.
12