E105, 313327, REV A
Protocol 3
TM
User Guide
58 of 82
©2021 ITW EAE. All rights reserved. Despatch is a registered trademark in the U.S. and other
countries.
No part of the contents of this manual may be reproduced, copied or transmitted in any form
or by any means without the written permission from ITW EAE, unless for purchaser's personal use.
5.
Input unique file name: press
to move right and
to move left. Press
or
navigate through numbers, uppercase letters and lower case
letters.
6.
For
Confirm Write?,
a.
Press
No
to abort the process and return to the previous menu
b.
Press
Yes
to continue to write the file or folder.
6.6.
Configuration Menu
Configuration provides access to menus that allow for setting up 11 different
options:
1.
Input: Input settings and calibrate for process and High Limit Inputs
2.
Control
3.
Output
4.
Alarm
5.
Power Fail Recovery
6.
Comms. (Communication)
7.
Recorder
8.
Clock
9.
Display
10.
Lock Code Configuration
11.
Reset to Defaults
Navigate the configuration menus options using the flowchart (Figure 26) or
. Figure 26 shows the Protocol 3 Controller configuration options. Access the
Configuration from the Main Manu (Section 6.2.4):
1.
Simultaneously press
and
.
2.
Navigate to
Configuration Menu
using
or
3.
Press
to
Enter Configuration Menu
Mode Unlock Code.
4.
Press
to reach
0010,
the Mode Unlock Code.
5.
Press
to display the configuration choices.
6.
Navigate to the desired option using
and
.
