E105, 313327, REV A
Protocol 3
TM
User Guide
78 of 82
©2021 ITW EAE. All rights reserved. Despatch is a registered trademark in the U.S. and other
countries.
No part of the contents of this manual may be reproduced, copied or transmitted in any form
or by any means without the written permission from ITW EAE, unless for purchaser's personal use.
•
Baud Rate
o
For problems communicating, try a lower baud rate. But start with the
default baud rate.
o
Default = 19.2K
•
Parity
o
Leave parity at the default setting
o
Default = None
In addition to checking for proper settings:
•
Check cabling between the computer running the software and the oven
(Figure 30)
•
Review schematics for older model serial converters (Figure 31)
•
Review schematics for newer model serial converters (Figure 32)
•
Review schematics for USB converter (Figure 33)
Figure 30. Check Cabling.
