Despatch/Watlow 1500 Control Instruction Manual
Page 9
Setting the Clock
1.
Press the
MODE
key to select the Change Parameter
(CHG PARA) mode. The
TIME
LED will be ON. The
FUNCTION
and
DATA
displays will show the real time
of day.
2.
Press
FCTN
to produce the time prompt,
HR
, in the
FUNCTION
display.
3.
Enter the real time of day, beginning with hours. The
CHG PARA
programming prompts are listed below in
the order they appear.
a. Enter the real time of day (24 hour basis) by
selecting the hour with the
>
key and the
?
key.
b. Press
ENTER
to enter the hour into the program.
The prompt
MN
will appear when you press
ENTER
.
c. Select correct minutes and seconds.
After setting the real time the
FUNCTION
prompt should
display a
GA
. This is guarded access.
